We offer high purity grades for all your applications

Our team of experts has developed high purity products that are used in a wide range of industries: pharmaceuticals, healthcare, agribusiness, electronics, petroleum and gas, and in research by private organizations and public bodies such as universities.

Grade

GPR Grade
  • Reagent for general purposes, used in low grade applications and/or qualitative testing.
Pharma Grade
  • Use in a wide variety of pharmaceutical industries
  • For general analytical applications
  • Products that meet the requirements of pharmaceutical standard (Ph.Eur, BP, EP, USP/NF)
AR Grade
  • For general analytical applications
  • Purity meets the requirement of ACS Standard
RCI Premium Grade
  • High purity solvents and reagents with low level of impurities, conform to ACS, BP, Ph.Eur and EP standard.
  • Suitable for laboratory and special analytical techniques.
HPLC Grade
  • For analytical and preparative separation.
  • Mobile phase in HPLC or LC technique including gel permeation chromatography.
  • Suitable for various types of detector./li>
  • Use in the wavelength between 190-230 nm (Far UV region).
Gradient Grade :
Super Gradient Grade
Ultra Gradient Grade
  • For analytical and preparative separation.
  • Mobile phase for gradient technique.
  • Low baseline drift and low levels of impurities.
LC-MS Grade
  • For analytical and preparative separation.
  • Suitable for LC-MS analytical technique.
  • Low level of trace metals and filtered through 0.1 μm filters.
  • Low fluorescence and high UV transmittance.
  • Low acidity & alkalinity, and low particulates to ensure minimal interference.
ULC-MS Grade
  • For analytical and preparative separation.
  • Designed to meet the high requirements of the updated chemical analysis equipment technologies.
  • Providing clear and reliable results in positive and negative modes.
  • Suitable for ULC-MS analytical technique.
  • It has high purity solvent with low level of trace metals and filtered through at least 0.1 μm filters.
  • Low fluorescence and high UV transmittance.
  • Low acidity & alkalinity, and low particulates to ensure minimal interference.
Anhydrous Grade
  • Low moisture solvent for anhydrous applications
UV-IR Grade
  • High purity solvent for UV-IR Spectroscopy with low absorption.
GC Analysis Grade
  • High purity solvents designed to ensure optimization for GC applications.
  • Elimination of all major interference peaks in the range of target analyses.
  • High UV transmittance and was filtered through 0.2 μm filters.
Pesticide Grade
  • For pesticide and insecticide residue analysis.
  • Suitable for extraction, isolation and preconcentration technique.
  • For environment analysis by capillary GC and GC-MS application.
  • For Volatile Organic Analysis (soil, water and solid waste samples)
LVI-GC Grade
  • Suitable for ultimate organic trace analysis; checked for ppb levels of Poly-Aromatic Hydrocarbons (PAH’s), Furan, PCB’s, Pesticides.
  • For analysis of hydrocarbons in the range of C10 to C40.
  • For residual organic contaminants.
Purge & Trap Grade
  • Suitable for volatile organic residue analysis by GC-MS in water or soil-sediment samples acc. to the EPA purge and trap.
Headspace GC Analysis Grade
  • High purity solvents designed to ensure optimization for Headspace GC applications.
  • Suitable as solvent for the analysis of residual solvent of ICH classes 1, 2 and 3 according to Ph Eur and USP.
  • Elimination of all major interference peaks in the elution range of target analyses.
GC-MS Grade
  • Suitable for GC-MS analytical technique with a high purity & functionality specifically tested in GC-MS.
  • Suitable as solvent for the analysis of hydrocarbons in the range of C10 to C40.
  • GC-MSD (as n-Tetradecane standard) Single impurity peak, (retention range n-undecane to n-tetracontane). The qualities are tested for the specific detectors and offer a clear baseline and minimal signal-to-noise ratio within a specified retention time range.
Peptide Synthesis Grade
  • Suitable for Solid Phase Peptide Synthesis.
Superpure Grade
  • Chemicals in a low level of elemental impurities in part per billion (ppb)
  • Suitable for instrumental application in atomic spectroscopy (AAS, ICP‑OES, ICP‑MS), ion chromatography, or voltammetry
  • It is a tool for inorganic trace analysis.
Semig Grade
  • High purity acids and solvents for electronic industrial applications.
  • Low levels of metallic impurities.
Electropure Grade
  • High purity acids and solvents for cleaning and etching in electronic industrial applications.
  • Low levels of metallic impurities.
  • Nitric acid 70% and Sulfuric acid 98% low Hg, both suitable for trace metal analysis.
Extropure Grade
  • High purity solvents for electronic industrial applications.
  • Low levels of metallic impurities.
  • Free of Silicone, DOP and Amide.
Electro Extra Grade
  • Sulfuric acid 89% for semi-conductor industry and other electronic industrial.
  • Low levels of metallic impurities content 0.5 ppm maximum.
VLSI Grade
  • Very high purity acids and solvents for cleaning and etching wafers for the semi-conductor industry and other electronic industrial applications.
  • Very low levels of metallic impurities. Used for trace metal analysis.
CG Grade
  • For general use.
ACS Grade
  • Specialized for industrial usages.
  • Conform to ACS standard.
LC Grade
  • For use in analytical and preparative separation.
  • Mobile phase in HPLC or LC technique including gel permeation chromatography.
  • Mobile phase for different type of detector.
EL Grade
  • Advanced chemicals for Electronics and Solar PV industries.
UP Grade
  • Advanced chemicals for Electronics and Solar PV industries.