| GPR Grade |
- Reagent for general purposes, used in low grade applications and/or qualitative testing.
|
 |
| Pharma Grade |
- Use in a wide variety of pharmaceutical industries
- For general analytical applications
- Products that meet the requirements of pharmaceutical standard (Ph.Eur, BP, EP, USP/NF)
|
|
| AR Grade |
- For general analytical applications
- Purity meets the requirement of ACS Standard
|
|
| RCI Premium Grade |
- High purity solvents and reagents with low level of impurities, conform to ACS, BP, Ph.Eur and EP standard.
- Suitable for laboratory and special analytical techniques.
|
|
| HPLC Grade |
- For analytical and preparative separation.
- Mobile phase in HPLC or LC technique including gel permeation chromatography.
- Suitable for various types of detector.
- Use in the wavelength between 190-230 nm (Far UV region).
|
|
Gradient Grade :
Super Gradient Grade
Ultra Gradient Grade |
- For analytical and preparative separation.
- Mobile phase for gradient technique.
- Low baseline drift and low levels of impurities.
|
|
| LC-MS Grade |
- For analytical and preparative separation.
- Suitable for LC-MS analytical technique.
- Low level of trace metals and filtered through 0.1 μm filters.
- Low fluorescence and high UV transmittance.
- Low acidity & alkalinity, and low particulates to ensure minimal interference.
|
|
| ULC-MS Grade |
- For analytical and preparative separation.
- Designed to meet the high requirements of the updated chemical analysis equipment technologies.
- Providing clear and reliable results in positive and negative modes.
- Suitable for ULC-MS analytical technique.
- It has high purity solvent with low level of trace metals and filtered through at least 0.1 μm filters.
- Low fluorescence and high UV transmittance.
- Low acidity & alkalinity, and low particulates to ensure minimal interference.
|
|
| Anhydrous Grade |
- Low moisture solvent for anhydrous applications
|
|
| UV-IR Grade |
- High purity solvent for UV-IR Spectroscopy with low absorption.
|
|
| GC Analysis Grade |
- High purity solvents designed to ensure optimization for GC applications.
- Elimination of all major interference peaks in the range of target analyses.
- High UV transmittance and was filtered through 0.2 μm filters.
|
|
| Pesticide Grade |
- For pesticide and insecticide residue analysis.
- Suitable for extraction, isolation and preconcentration technique.
- For environment analysis by capillary GC and GC-MS application.
- For Volatile Organic Analysis (soil, water and solid waste samples)
|
|
| LVI-GC Grade |
- Suitable for ultimate organic trace analysis; checked for ppb levels of Poly-Aromatic Hydrocarbons (PAH’s), Furan, PCB’s, Pesticides.
- For analysis of hydrocarbons in the range of C10 to C40.
- For residual organic contaminants.
|
|
| Purge & Trap Grade |
- Suitable for volatile organic residue analysis by GC-MS in water or soil-sediment samples acc. to the EPA purge and trap.
|
|
| Headspace GC Analysis Grade |
- High purity solvents designed to ensure optimization for Headspace GC applications.
- Suitable as solvent for the analysis of residual solvent of ICH classes 1, 2 and 3 according to Ph Eur and USP.
- Elimination of all major interference peaks in the elution range of target analyses.
|
|
| GC-MS Grade |
- Suitable for GC-MS analytical technique with a high purity & functionality specifically tested in GC-MS.
- Suitable as solvent for the analysis of hydrocarbons in the range of C10 to C40.
- GC-MSD (as n-Tetradecane standard) Single impurity peak, (retention range n-undecane to n-tetracontane). The qualities are tested for the specific detectors and offer a clear baseline and minimal signal-to-noise ratio within a specified retention time range.
|
|
| Peptide Synthesis Grade |
- Suitable for Solid Phase Peptide Synthesis.
|
|
| Superpure Grade |
- Chemicals in a low level of elemental impurities in part per billion (ppb)
- Suitable for instrumental application in atomic spectroscopy (AAS, ICP‑OES, ICP‑MS), ion chromatography, or voltammetry
- It is a tool for inorganic trace analysis.
|
|
| Semig Grade |
- High purity acids and solvents for electronic industrial applications.
- Low levels of metallic impurities.
|
|
| Electropure Grade |
- High purity acids and solvents for cleaning and etching in electronic industrial applications.
- Low levels of metallic impurities.
- Nitric acid 65% and Sulfuric acid 98% low Hg, both suitable for trace metal analysis.
|
|
| Extropure Grade |
- High purity solvents for electronic industrial applications.
- Low levels of metallic impurities.
- Free of Silicone, DOP and Amide.
|
|
| Electro Extra Grade |
- Sulfuric acid 89% for semi-conductor industry and other electronic industrial.
- Low levels of metallic impurities content 0.5 ppm maximum.
|
|
| VLSI Grade |
- Very high purity acids and solvents for cleaning and etching wafers for the semi-conductor industry and other electronic industrial applications.
- Very low levels of metallic impurities. Used for trace metal analysis.
|
|
| CG Grade |
|
 |
| ACS Grade |
- Specialized for industrial usages.
- Conform to ACS standard.
|
|
| LC Grade |
- For use in analytical and preparative separation.
- Mobile phase in HPLC or LC technique including gel permeation chromatography.
- Mobile phase for different type of detector.
|
|
| EL Grade |
- Advanced chemicals for Electronics and Solar PV industries.
|
 |
| UP Grade |
- Advanced chemicals for Electronics and Solar PV industries.
|
|
